Inquiry
Form loading...
External Tire Pressure Sensor (Transmitter)

Sensor

External Tire Pressure Sensor (Transmitter)

Description

External tire pressure sensor is installed in the car hub and automatically monitors tire pressure, temperature, and battery level.The built-in sensor and the external sensor are installed in different positions, but because the external sensor is directly installed on the gas mouth, the accuracy of the tire pressure measurement will not be affected. In the measurement of tire temperature, the external sensor will have an error of 1-2 degrees compared with the built-in one.

The external tire pressure sensor uses a wireless transmitter to send pressure information from the outside of the tire to the central receiver module, and then displays the pressure data of each tire. When the tire pressure is too low or the air leaks, the system will automatically alarm.The transmitter system consists of the following parts: electronic part (including tire pressure module, crystal oscillator, antenna, RF module, low-frequency module, battery) and structural part (shell, strap).

    description2

    Description

    p131d
    Tire pressure module: In the transmitter system, the tire pressure module is a highly integrated module that inherits the MCU, pressure sensor, and temperature sensor. By embedding firmware into the MCU, pressure, temperature, and acceleration data can be collected and processed accordingly, and sent out through the RF module.
    Crystal oscillator: The crystal oscillator provides an external clock for the MCU, and by configuring the MCU register, parameters such as the center frequency and baud rate of the RF signal sent by the transmitter can be determined.
    Antenna: The antenna can send out data transmitted by the MCU.
    Radio frequency module: Data was taken from the tire pressure module and sent via 433.92MHZFSK radio frequency.
    Low frequency antenna: Low frequency antenna can respond to low frequency signals and transmit them to MCU.
    Battery: Powers the MCU. The battery power has a great impact on the service life of the transmitter.
    PCB: Fixed components and provide reliable electrical connections.
    Shell: Isolates internal electronic components from water, dust, static electricity, etc., while also preventing direct mechanical impact on internal components.

    Features

    • High integration (pressure, temperature, acceleration data acquisition)
    • High precision 8kPa@ (0℃-70℃)
    • RF wireless transmission
    • High battery life ≥2years

    Technical parameter

    Operating voltage

    2.0V~4.0V

    Operating temperature

    -20~80℃

    Storage temperature

    -40℃~85℃

    RF operating frequency

    433.920MHz±20kHz

    RF FSK frequency offset

    ±25KHz

    RF Symbol Rate

    9.6kbps

    High-frequency transmitting power

    ≤10dBm(VDD=3.0V,T=25℃)

    Pressure measuring range

    100~800kpa

    Static current

    ≤3uA@3.0V

    Emission current

    11.6mA@3.0V

    Barometric measurement accuracy

     

    ≤8kPa@(0~70℃)

    ≤12kPa @(-20~0℃, 70~85℃)

    Temperature measurement accuracy

    ≤3℃(-20~70℃)

    ≤5℃(70~80℃)

    Battery power detection range

    2.0V~3.3V

    Battery life

    2 years@CR1632 


    Appearance

    p2j9v

    p3q7k

    Size

    Length

    23.2mm±0.2

    Height

    15.9mm±0.2

    Weight

    ≤12g 

    Leave Your Message